NXLog Legacy Documentation

Batched Compression (om_batchcompress)

This module uses its own protocol to send batches of log messages to a remote NXLog instance configured with the im_batchcompress module. The messages are compressed in batches in order to achieve better compression ratios than would be possible individually. The module serializes and sends all fields across the network so that structured data is preserved. It can be configured to send data using SSL for secure and encrypted data transfer. The protocol contains an acknowledgment in order to ensure that the data is received by the remote server. The batch will be resent if the server does not respond with an acknowledgment.

Configuration

The om_batchcompress module accepts the following directives in addition to the common module directives. The Host directive is required.

Host: The module connects to the IP address or hostname defined in this directive. If additional hosts are specified on new lines, the module works in a failover configuration. If a destination becomes unavailable, the module automatically fails over to the next one. If the last destination becomes unavailable, the module will fail over to the first destination.

The port number can be defined by appending it at the end of the hostname or IP address using a colon as a separator (host:port). For each destination with no port number defined here, the port number specified in the Port directive is used. Port numbers defined here take precedence over any port number defined in the Port directive.

Port: The module connects to the port number on the destination host defined in this directive. This configuration is only used for any destination that does not have a port number specified in the Host directive. If no port is configured for a destination in either directive, the default port is used, which is port 2514.

The Port directive will become deprecated from NXLog EE 6.0. After that, the port can only be defined in the Host directive.

AllowExpired: This boolean directive specifies whether the connection should be allowed with an expired certificate. If set to TRUE, the connection will be allowed even if the remote server presents an expired certificate. The default is FALSE: the remote server must present a certificate that is not expired. This directive is only valid if UseSSL is set to TRUE.

AllowUntrusted: This boolean directive specifies that the remote connection should be allowed regardless of the certificate verification results. If set to TRUE, the connection will be allowed with any unexpired certificate provided by a server. The default value is FALSE: the remote server must present a trusted certificate.

CADir

This directive specifies a path to a directory containing certificate authority (CA) certificates. These certificates will be used to verify the certificate presented by the remote server. The certificate files must be named using the OpenSSL hashed format, i.e. the hash of the certificate followed by .0, .1 etc. To find the hash of a certificate using OpenSSL:

$ openssl x509 -hash -noout -in ca.crt

For example if the certificate hash is e2f14e4a, then the certificate filename should be e2f14e4a.0. If there is another certificate with the same hash then it should be named e2f14e4a.1 and so on.

A remote server’s self-signed certificate (which is not signed by a CA) can also be trusted by including a copy of the certificate in this directory.

Unix-like operating systems use the /etc/ssl/certs path as their default for certificates. Windows uses the Windows Certificate Store as a default path for certificates.

CAFile: This specifies the path of the certificate authority (CA) certificate that will be used to verify the certificate presented by the remote server. A remote server’s self-signed certificate (which is not signed by a CA) can be trusted by specifying the remote server certificate itself. In case of certificates signed by an intermediate CA, the certificate specified must contain the complete certificate chain (certificate bundle).

CAThumbprint: This optional directive specifies the thumbprint of the certificate authority (CA) certificate that will be used to verify the certificate presented by the remote server. The hexadecimal fingerprint string can be copied from Windows Certificate Manager (certmgr.msc). Whitespaces are automatically removed. The certificate must be added to a Windows certificate store that is accessible by NXLog. This directive is only supported on Windows and is mutually exclusive with the CADir and CAFile directives.

SearchAllCertStores: This optional boolean directive, when set to TRUE, enables the loading of all available Windows certificates into NXLog, for use during remote certificate verification. Any required certificates must be added to a Windows certificate store that NXLog can access. This directive is mutually exclusive with the CAThumbprint, CADir and CAFile directives.

CertFile: This specifies the path of the certificate file that will be presented to the remote server during the SSL handshake.

CertKeyFile: This specifies the path of the private key file that was used to generate the certificate specified by the CertFile directive. This is used for the SSL handshake.

CertThumbprint

This optional directive specifies the thumbprint of the certificate that will be presented to the remote server during the SSL handshake. The hexadecimal fingerprint string can be copied from Windows Certificate Manager (certmgr.msc). Whitespaces are automatically removed. The certificate must be imported to the Local Computer\Personal certificate store in PFX format for NXLog to find it. To create a PFX file from the certificate and private key using OpenSSL:

$ openssl pkcs12 -export -out server.pfx -inkey server.key -in server.pem

This directive is only supported on Windows and is mutually exclusive with the CertFile and CertKeyFile directives.

CRLDir

This directive specifies a path to a directory containing certificate revocation list (CRL) files. These CRL files will be used to check for certificates that were revoked and should no longer be accepted. The files must be named using the OpenSSL hashed format, i.e. the hash of the issuer followed by .r0, .r1 etc. To find the hash of the issuer of a CRL file using OpenSSL:

$ openssl crl -hash -noout -in crl.pem

For example if the hash is e2f14e4a, then the filename should be e2f14e4a.r0. If there is another file with the same hash then it should be named e2f14e4a.r1 and so on.

CRLFile

This specifies the path of the certificate revocation list (CRL) which will be used to check for certificates that have been revoked and should no longer be accepted. Example to generate a CRL file using OpenSSL:

$ openssl ca -gencrl -out crl.pem

DHFile: This optional directive specifies a file with dh-parameters for Diffie-Hellman key exchange. These parameters can be generated with dhparam(1ssl). If this directive is not specified, default parameters will be used. See the OpenSSL Wiki for further details.

FlushInterval: This directive has been deprecated. See Batch processing for details.

FlushLimit: This directive has been deprecated. See Batch processing for details.

KeyPass

This directive specifies the passphrase of the private key specified by the CertKeyFile directive. A passphrase is required when the private key is encrypted. Example to generate a private key with Triple DES encryption using OpenSSL:

$ openssl genrsa -des3 -out server.key 2048

This directive is not needed for passwordless private keys.

LocalPort

This optional directive specifies the local port number of the connection. If this is not specified, a random high port number will be used, which is not always ideal in firewalled network environments.

Due to the required TIME-WAIT delay in closing connections, attempts to bind to LocalPort may fail. In such cases, the message Address already in use will be written to nxlog.log. If the situation persists, it could impede network performance.

Reconnect

This optional directive sets the reconnect interval in seconds. If it is set, the module attempts to reconnect in every defined second. If it is not set, the reconnect interval will start at 1 second and doubles with every attempt. If the duration of the successful connection is greater than the current reconnect interval, then the reconnect interval will be reset to 1 sec.

The Reconnect directive must be used with caution. If it is used on multiple systems, it can send reconnect requests simultaneously to the same destination, potentially overloading the destination system. It may also cause NXLog to use unusually high system resources or cause NXLog to become unresponsive.

SSLCipher: This optional directive can be used to set the permitted cipher list for TLSv1.2 and below, overriding the default. Use the format described in the ciphers(1ssl) man page. For example specify RSA:!COMPLEMENTOFALL to include all ciphers with RSA authentication but leave out ciphers without encryption.

If RSA or DSA ciphers with Diffie-Hellman key exchange are used, DHFile can be set for specifying custom dh-parameters.

SSLCiphersuites

This optional directive can be used to set the permitted cipher list for TLSv1.3. Use the same format as in the SSLCipher directive. Refer to the OpenSSL documentation for a list of valid TLS v1.3 cipher suites. The default value is:

TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256

SSLProtocol: This directive can be used to set the allowed SSL/TLS protocol(s). It takes a comma-separated list of values which can be any of the following: SSLv2, SSLv3, TLSv1, TLSv1.1, TLSv1.2, and TLSv1.3. By default, the TLSv1.2 and TLSv1.3 protocols are allowed. Note that the OpenSSL library shipped by Linux distributions may not support SSLv2 and SSLv3, and these will not work even if enabled with this directive.

UseSSL: This boolean directive specifies that SSL transfer mode should be enabled. The default is FALSE.

Procedures

The following procedures are exported by om_batchcompress.

reconnect();

Force a reconnection. This can be used from a Schedule block to periodically reconnect to the server.

The reconnect() procedure must be used with caution.

If configured, it can attempt to reconnect after every event sent, potentially overloading the destination system.

Examples

Pre-v5 syntax examples are included, they will become invalid with NXLog EE 6.0.

Example 1. Sending Logs With om_batchcompress

This configuration forwards logs in compressed batches to a remote NXLogagent over the default port. Batches are sent at least once every two seconds, or more frequently if the buffer reaches 100 events.

nxlog.conf

<Input null>
    Module              im_null
    BatchSize           200
    BatchFlushInterval  2
</Input>
<Output batchcompress>
    Module          om_batchcompress
    Host            example.com:2514
</Output>

# Example using the syntax used before NXLog EE 5,
# where the port is defined in a separate directive.
#<Output batchcompress>
#    Module          om_batchcompress
#    Host            example.com
#    Port            2514
#</Output>
<Route null_to_batchcompress>
    Path  null => batchcompress
</Route>

Example 2. Sending Batch Compressed Logs with Failover

This configuration sends logs in compressed batches to a remote {productName agent in a failover configuration (multiple Hosts defined).

nxlog.conf

<Output batchcompress>
    Module  om_batchcompress
    # destination host / IP and destination port
    Host    example1:2514
    # first fail-over
    Host    example2:2514
</Output>