NXLog Docs

Kafka (om_kafka)

This module implements an Apache Kafka producer for publishing event records to a Kafka topic. See also the im_kafka module.

The om_kafka module is not supported as the underlying librdkafka library is unstable on AIX. Use it on IBM AIX at your own risk.

The module uses an internal persistent queue to back up event records that should be pushed to a Kafka broker. Once the module receives an acknowledgement from the Kafka server that the message has been delivered successfully, the module removes the corresponding message from the internal queue. If the module is unable to deliver a message to a Kafka broker (for example, due to connectivity issues or the Kafka server being down), this message is retained in the internal queue (including cases when NXLog restarts) and the module will attempt to re-deliver the message again.

The number of re-delivery attempts can be specified by passing the message.send.max.retries property via the Option directive (for example, Option message.send.max.retries 5). By default, the number of retries is set to 2 and the time interval between two subsequent retries is 5 minutes. Thus, by altering the number of retries, it is possible to control the total time for a message to remain in the internal queue. If a message cannot be delivered within the allowed retry attempts, the message is dropped. The maximum size of the internal queue defaults to 100 messages. To increase the size of the internal queue, you can use the LogqueueSize directive.

Configuration

The om_kafka module accepts the following directives in addition to the common module directives. The BrokerList and Topic directives are required.

BrokerList

This mandatory directive specifies the list of Kafka brokers to connect to for publishing logs. The list should include ports and be comma-delimited (for example, localhost:9092,192.168.88.35:19092).

Kafka brokers are metadata relays that return information about the cluster, including the available topics and how they are partitioned. NXLog connects to the broker(s) specified in the BrokerList directive to retrieve the actual URI it needs to connect to for reading or writing data to the relevant topic. If NXLog connects to the broker but fails to read or write data, ensure the broker is returning the correct endpoint information. See the Kafka documentation on listeners and advertised.listeners for more information.

Topic

This mandatory directive specifies the Kafka topic to publish records to.


CAFile

This specifies the path of the certificate authority (CA) certificate, which will be used to check the certificate of the remote brokers. CAFile is required if Protocol is set to ssl or sasl_ssl. To trust a self-signed certificate presented by the remote (which is not signed by a CA), provide that certificate instead.

CAThumbprint

This optional directive specifies the thumbprint of the certificate authority (CA) certificate that will be used to verify the certificate presented by the remote server. The hexadecimal fingerprint string can be copied from Windows Certificate Manager (certmgr.msc). Whitespaces are automatically removed. The certificate must be added to a Windows certificate store that is accessible by NXLog. This directive is only supported on Windows and is mutually exclusive with the CADir and CAFile directives.

CertFile

This specifies the path of the certificate file to be used for the SSL handshake.

CertKeyFile

This specifies the path of the certificate key file to be used for the SSL handshake.

Compression

This directive specifies the compression types to use during transfer. Available types depend on the Kafka library, and should include none (the default), gzip, snappy, and lz4.

KeyPass

With this directive, a password can be supplied for the certificate key file defined in CertKeyFile. This directive is not needed for passwordless private keys.

Option

This directive can be used to pass a custom configuration property to the Kafka library (librdkafka). For example, the group ID string can be set with Option group.id mygroup. This directive may be used more than once to specify multiple options. For a list of configuration properties, see the librdkafka CONFIGURATION.md file.

Passing librdkafka configuration properties via the Option directive should be done with care since these properties are used for the fine-tuning of the librdkafka performance and may result in various side effects.
Partition

This optional integer directive specifies the topic partition to write to. If this directive is not given, messages are sent without a partition specified.

Protocol

This optional directive specifies the protocol to use for connecting to the Kafka brokers. Accepted values include plaintext (the default), ssl, sasl_plaintext and sasl_ssl. If Protocol is set to ssl or sasl_ssl, then the CAFile directive must also be provided.

SASLKerberosServiceName

This directive specifies the Kerberos service name to be used for SASL authentication. The service name is required for the GSSAPI SASLMechanism.

SASLKerberosPrincipal

This specifies the client’s Kerberos principal name for the sasl_plaintext and sasl_ssl protocols. This directive is only available on Linux/UNIX and is mandatory when SASLMechanism is set to GSSAPI. See note below.

SASLKerberosKeytab

Specifies the path to the kerberos keytab file which contains the client’s allocated principal name. This directive is only available on Linux/UNIX and is mandatory when SASLMechanism is set to GSSAPI.

The SASLKerberosServiceName and SASLKerberosPrincipal directives are only available on Linux/UNIX. On Windows, the login user’s principal name and credentials are used for SASL/Kerberos authentication.

For details about configuring Apache Kafka brokers to accept SASL/Kerberos authentication from clients, please follow the instructions provided by the librdkafka project:

SASLMechanism

This optional directive specifies the SASL mechanism to use for authentication. Supported mechanisms are GSSAPI (the default) and OAUTHBEARER. This directive can only be specified, when Protocol is set to sasl_plaintext or sasl_ssl.

SASLOAuthBearerClientID

This directive specifies the public identifier for the application. It must be unique across all clients that the authorization server handles. This directive is mandatory when SASLMechanism is set to OAUTHBEARER.

SASLOAuthBearerClientSecret

This directive specifies the secret known only to the application and the authorization server. This should be a sufficiently random string that is not guessable. This directive is mandatory when SASLMechanism is set to OAUTHBEARER.

SASLOAuthBearerEndpointURL

This directive specifies the OAUTH issuer token endpoint HTTP(S) URI used to retrieve the token. This directive is mandatory when SASLMechanism is set to OAUTHBEARER.

SASLOAuthBearerExtensions

This directive specifies additional parameters as a comma-separated list of key=value pairs to be provided to the broker. For example: supportFeatureX=true,organizationId=sales-emea. This directive is optional and only available when SASLMechanism is set to OAUTHBEARER.

SASLOAuthBearerScope

This directive specifies a scope of the access request to the broker. This directive is optional and only available when SASLMechanism is set to OAUTHBEARER.

Examples

Example 1. Using the om_kafka module

This configuration sends events to a Kafka cluster using the brokers specified. Events are published to the first partition of the nxlog topic.

nxlog.conf
<Output out>
    Module          om_kafka
    BrokerList      localhost:9092,192.168.88.35:19092
    Topic           nxlog
    LogqueueSize    100000
    Partition       0
    Protocol        ssl
    CAFile          %CERTDIR%/ca.pem
    CertFile        %CERTDIR%/client-cert.pem
    CertKeyFile     %CERTDIR%/client-key.pem
    KeyPass         thisisasecret
</Output>
Example 2. Using the om_kafka module with SASL OAUTHBEARER authentication

This configuration sends events to a Kafka cluster using the brokers specified. Authentication is done via SASL OAUTHBEARER mechanism with support for OIDC. Events are published to the first partition of the nxlog topic.

nxlog.conf
<Output out>
    Module                      om_kafka
    LogqueueSize                100000

    BrokerList                  localhost:9092,192.168.88.35:19092
    Topic                       nxlog
    Partition                   0

    Protocol                    sasl_ssl

    CAFile                      %CERTDIR%/ca.pem
    CertFile                    %CERTDIR%/client-cert.pem
    CertKeyFile                 %CERTDIR%/client-key.pem
    KeyPass                     thisisasecret

    SASLMechanism               OAUTHBEARER
    SASLOAuthBearerClientID     client-id
    SASLOAuthBearerClientSecret client-secret
    SASLOAuthBearerEndpointURL  https://oauth2.endpoint.com/
    SASLOAuthBearerExtensions   key1=value1,key2=value2
    SASLOAuthBearerScope        write
</Output>

The librdkafka library can produce its performance statistics and format it in JSON. All fields from the JSON structure are explained on the Statistics page of the librdkafka project on the GitHub website. NXLog can be configured to poll this data at a specified fixed interval. The result can be saved to the internal logger.

Example 3. Collecting Internal Statistics

To read statistical data of the librdkafka library, the millisecond polling interval needs to be specified against the Option directive using the statistics.interval.ms option.

The Schedule block sets the interval to run the code of the nested Exec block. Inside the Exec block, the log_info() procedure is called with the kafka_in->get_stats() parameter passed.

To get the librdkafka statistics produced and delivered synchronously, the statistics.interval.ms option and the Schedule block should specify the same interval amount.

nxlog.conf, Writing to the Internal Logger
<Input to_kafka>
    Module        im_kafka
    Topic         nxlog
    BrokerList    localhost:9092
    Option        statistics.interval.ms 10000
    <Schedule>
        Every     10 sec
        Exec      log_info(to_kafka->get_stats());
    </Schedule>
</Input>